Dotmod - DotLeaf Dry Herb Vape
Dotmod
DotLeaf by dotmod
Power at the palm of your hand
The dotLeaf offers and out-of-this-world dry herb vaping experience that can heat material up to 245°C (473°F) with boost, so you won't be restricted to how hot you want your herb to vape.
The dotLeaf does not use conventional combustion heating, limiting the amount of air pollution, tar, and carcinogens emitted into your home and environment.
Fully compatible with all standard >>510 Drip Tips<<, as well as all >>dotAIO Door Panel Sets<<!
Note: Due to the completely different dotChip 2.0 used in the dotLeaf, it cannot be used as a replacement for the dotmod dotAIO, and as such, you cannot use the dotAIO tank chambers, dotAIO coils, nor the dotAIO RBA's in the dotLeaf. The dotLeaf can only be used with the >>dotLeaf Heating Chamber<< due to the constant power output applied to the coil, even when the button is not pressed.
Small size, big punch
With the dotLeaf's easy to remove and open ceramic chamber, cleaning and refilling the chamber is incredibly easy. The dotLeaf has 4 heat presets along with a short boost mode to get the right temperature for your dry herb of choice. The dotLeaf also has a protection mechanism where if the chip reaches 75°C, the light will blink 5 times and power down automatically to allow the device electronics to cool down.
Powered by a single >>18650 battery<< (not included), the dotLeaf is designed for maximum battery life.
Efficiency
The heating chamber module consists of a ceramic core chamber to house your material to be vaporized, which is then housed within an Ultem (PEI) enclosure. With the high heat reflectivity properties of Ultem, the majority of heat produced by the heating element is reflected back inwards towards the ceramic chamber, resulting in efficient usage of the expended energy, and minimized heating of the mod itself.
Multiple possibilities
Not only does the dotLeaf work as a standalone device, but you can also use the dotLeaf with your favourite water pipe. Included in the kit is a 14mm and 18mm adapter so you can get a better experience from the dotLeaf.
dotChip 2.0
The new dotChip 2.0 makes vaping incredibly simple with just a few clicks of a button. Main functions include:
Temperature Adjust: 4 preset temperatures available
Overheat Protection: Device powers down if chip temperatures exceed 75°C
Boost Mode: Increase preset temperatures during session for warmer output
Need a boost?
Looking for a little boost during your session? Hold the fire button down during your session, and the dotLeaf will give you a 15°C power boost for a more powerful hit.
Environmentally Sound
The dotLeaf is designed with the environment in mind, and is constructed from high quality aluminum to lessen the amount of plastic waste generated.
Includes:
1x dotLeaf
1x Dry herb tank
1x POM (Delrin) mouth piece
1x POM (Delrin) 14mm adapter
1x POM (Delrin) 18mm adapter
1x Multi-tool
1x Brush
1x Type-C charging cable
1x Service pack
Power at the palm of your hand
The dotLeaf offers and out-of-this-world dry herb vaping experience that can heat material up to 245°C (473°F) with boost, so you won't be restricted to how hot you want your herb to vape.
The dotLeaf does not use conventional combustion heating, limiting the amount of air pollution, tar, and carcinogens emitted into your home and environment.
Fully compatible with all standard >>510 Drip Tips<<, as well as all >>dotAIO Door Panel Sets<<!
Note: Due to the completely different dotChip 2.0 used in the dotLeaf, it cannot be used as a replacement for the dotmod dotAIO, and as such, you cannot use the dotAIO tank chambers, dotAIO coils, nor the dotAIO RBA's in the dotLeaf. The dotLeaf can only be used with the >>dotLeaf Heating Chamber<< due to the constant power output applied to the coil, even when the button is not pressed.
Small size, big punch
With the dotLeaf's easy to remove and open ceramic chamber, cleaning and refilling the chamber is incredibly easy. The dotLeaf has 4 heat presets along with a short boost mode to get the right temperature for your dry herb of choice. The dotLeaf also has a protection mechanism where if the chip reaches 75°C, the light will blink 5 times and power down automatically to allow the device electronics to cool down.
Powered by a single >>18650 battery<< (not included), the dotLeaf is designed for maximum battery life.
Efficiency
The heating chamber module consists of a ceramic core chamber to house your material to be vaporized, which is then housed within an Ultem (PEI) enclosure. With the high heat reflectivity properties of Ultem, the majority of heat produced by the heating element is reflected back inwards towards the ceramic chamber, resulting in efficient usage of the expended energy, and minimized heating of the mod itself.
Multiple possibilities
Not only does the dotLeaf work as a standalone device, but you can also use the dotLeaf with your favourite water pipe. Included in the kit is a 14mm and 18mm adapter so you can get a better experience from the dotLeaf.
dotChip 2.0
The new dotChip 2.0 makes vaping incredibly simple with just a few clicks of a button. Main functions include:
Temperature Adjust: 4 preset temperatures available
Overheat Protection: Device powers down if chip temperatures exceed 75°C
Boost Mode: Increase preset temperatures during session for warmer output
Need a boost?
Looking for a little boost during your session? Hold the fire button down during your session, and the dotLeaf will give you a 15°C power boost for a more powerful hit.
Environmentally Sound
The dotLeaf is designed with the environment in mind, and is constructed from high quality aluminum to lessen the amount of plastic waste generated.
Includes:
1x dotLeaf
1x Dry herb tank
1x POM (Delrin) mouth piece
1x POM (Delrin) 14mm adapter
1x POM (Delrin) 18mm adapter
1x Multi-tool
1x Brush
1x Type-C charging cable
1x Service pack